Home > PAINT & SUNDRIES > SUNDRIES > LADDERS
We found 111 results matching your criteria.
Choose a sub category:
STEP - ALUMINUM STEP - FIBERGLASS UTILITY/FOLDING STEP STOOLS
STRAIGHT LADDERS EXTENSION - ALUMINUM EXTENSION - FIBERGLASS
PLATFORM LADDERS-FIBERGLASS COMBINATION/ MULTI LADDERS PLATFORM & SCAFFOLDING
LADDER ACCESSORIES
Sort By:
1 2 3 4
SPRING CLIP GREY 3IN          LOCK PIG TAIL                 LOCK ARM SCAFFOLD 13IN
LOCK PIG TAIL
Our Price: $2.79
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in. For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
PIN COUPLING W/COLLAR 1IN     BRKT RF 2X10IN 45DEG          BRACKET ROOF 2X6IN 45DEG
Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1.625 in. tube O.D. frames. Meets OSHA standards for safety. Designed for applications where consistent roof pitches and roof elevations are frequently encountered. Features a centrally mounted and welded steel ribbing plate with extra heavy duty welds. Provides a built-in cord and hose management system that helps prevent accidental tripping or falling caused by entanglement in air hoses and electrical cords on roof decks. Made from 1/8th inch steel, it features a double-welded base plate fulcrum and reinforced ribbing that eliminates roof bracket flexing under excess load conditions. Bench tested to support 2000 lbs of load. Designed for applications where consistent roof pitches and roof elevations are frequently encountered. Features a centrally mounted and welded steel ribbing plate with extra heavy duty welds. Provides a built-in cord and hose management system that helps prevent accidental tripping or falling caused by entanglement in air hoses and electrical cords on roof decks. Made from 1/8th inch steel, it features a double-welded base plate fulcrum and reinforced ribbing that eliminates roof bracket flexing under excess load conditions. Bench tested to support 2000 lbs of load.
BRACKET ROOF FIXED 2X10X60 DEG BRACKET ROOF FIXED 2X6INX60DEG BRACKET RF ORG STL 50DG 2X10IN
Designed for applications where consistent roof pitches and roof elevations are frequently encountered. Features a centrally mounted and welded steel ribbing plate with extra heavy duty welds. Provides a built-in cord and hose management system that helps prevent accidental tripping or falling caused by entanglement in air hoses and electrical cords on roof decks. Made from 1/8th inch steel, it features a double-welded base plate fulcrum and reinforced ribbing that eliminates roof bracket flexing under excess load conditions. Bench tested to support 2000 lbs of load. Designed for applications where consistent roof pitches and roof elevations are frequently encountered. Features a centrally mounted and welded steel ribbing plate with extra heavy duty welds. Provides a built-in cord and hose management system that helps prevent accidental tripping or falling caused by entanglement in air hoses and electrical cords on roof decks. Made from 1/8th inch steel, it features a double-welded base plate fulcrum and reinforced ribbing that eliminates roof bracket flexing under excess load conditions. Bench tested to support 2000 lbs of load. For those who need to install or repair a sloped roof (14/12).easy installation: attach the brackets to the rafters and place a plank on them. Its steel covered in a baked powder coating structure ensures durability and does not damage the shingles. 17-1/4? L x 2? W x 10? D
BRACKET ROOF 2X6IN 90DEG      GUARDRAIL 5FT                 GUARDRAIL 7FT
GUARDRAIL 5FT
Our Price: $15.99
GUARDRAIL 7FT
Our Price: $16.99
Designed for applications where consistent roof pitches and roof elevations are frequently encountered. Features a centrally mounted and welded steel ribbing plate with extra heavy duty welds. Provides a built-in cord and hose management system that helps prevent accidental tripping or falling caused by entanglement in air hoses and electrical cords on roof decks. Made from 1/8th inch steel, it features a double-welded base plate fulcrum and reinforced ribbing that eliminates roof bracket flexing under excess load conditions. Bench tested to support 2000 lbs of load. Meets ANSI, CSA and OSHA standards. Meets ANSI, CSA and OSHA standards.
BRACKET ROOF ADJ 3 POSITIONS  Mintcraft Pro YH-CS001 Casters STOOL STEP WHITE UTILITY 300LB
For those who install or repair rooves with a steep slope (2/12 to 24/12). Easy Installation: adjust it, attach it to the rafters and to place a plank on it. Its steel covered in a baked powder coating structure ensures durability and does not damage the shingles. Used with planed planks (1-1/2 in x 9-1/2 in) or rough planks (2 in x 10 in). Bolts with locknuts, reinforcement angle and exclusive bar. Adjust to 37, 56 and 63-degree angles. For Sku# 879.5478 scaffold. 5" Dia. x 1-1/4" W. Rubber wheel. Pin not included. 303 lb. load capacity. Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high.
BRACE SCAFFOLD CROSS 7X4FTX1IN M-MC48120 GALVANIZED BRACE 10' STAND OFF ARMS ALUM
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved. Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved. Stabilizes extension ladders for safer working conditions. Protects eaves troughs and siding prom damage. Positions the ladder away from your work area, making tasks easier to complete. Ideal for window and gutter cleaning jobs.
GUARDRAIL POST W/WEDGE CLAMP  Homebasix WK-2062A Folding Step Stools STOL RGHNK 2STP 16INH WHT
STOL RGHNK 2STP 16INH WHT
Our Price: $34.99
Meets ANSI, CSA and OSHA standards. Gray powder coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 18-1/2"; Step size: 15 L x 10-1/4"W; Open Size: 38-1/2"H x 19-1/4"W  x 20"D; Closed Size: 42-1/2" H x 19-1/4" W x 3" D. Size: 18.9" x 18-4" x 18"
BRKT RF ADJ 15-90 DEG         DOCKING STAT LDR 5-6IN GUTTER Homebasix WK-2063A Folding Step Stools
Roof scaffolding bracket with a crank handle that enables the user to adjust the bracket angle to the exact pitch of the roof. Can be adjusted 1 degree at a time from 18 degrees to 90 degrees. Has an elevation guide that shows the user the exact pitch the bracket is set at. Features heavy duty industrial winding mechanism and heavy duty rivets which are zinc plated to prevent corrosion and rusting. Load test rated to 3000 lbs. Meets OSHA Guidelines for safe roof staging. Provides gutter protection and fits inside any 5? or 6? gutter. Secures any ladder safely in place and disperses the ladders weight against the fascia, not the gutter. Built in tool holder. Hammertone coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 27-1/2". Step size: 15" L X 10" W; Open size: 50-3/4"(H) x 19-1/4"(W) x 25"(D); Closed size: 55-1/4"(H) x 19-1/4"(W) x 3"(D).
M-MBSJP24 SCREW JACK 24IN ADJU TRAY BAKER TOOL               BRACKET SIDE 20IN
TRAY BAKER TOOL
Our Price: $39.99
BRACKET SIDE 20IN
Our Price: $42.99
Solid tube. For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30.25 x 20 x 2.75 in. Meets ANSI, CSA and OSHA standards.
STOOL 2-STP FOLDABLE WHT 18IN LADDER STP AL TYP1A 300LB 2FT LADDER STEP ALUM TYPE 3 4 FT
Lightweight, resistant to rust and dents, easy to clean. Stands upright when folded. 25" x19" x 6-1/2". Slip resistant. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Large structural molded top. Large parts tray recessed 1/4" deep with tool slots. Heavy-duty side rails are full channel extrusions on the front and modified channel on back legs. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" Wide. Aluminum construction built to grade 3 standard. Slip resistant serrated steps for comfort and safety. Multi-purpose co-polymer top keeps tools close to the job.
   
 
1 2 3 4