Home > HAND TOOLS > STRIKING AND CUTTING TOOLS > HANDSAWS > HANDSAWS
We found 28 results matching your criteria.
Sort By:
1
SAW HND 90DEG 18.6X4.7IN 9PT  SAW HAND W/WOOD HNDL 8PT 20IN SAW HAND GEN PURPOSE 8PT 26IN
Fast cuts on push and pull strokes with precision ground, razor sharp teeth. The molded handle provides comfortable grip and the back of saw can be used to mark 45 and 90 degree angles. High quality carbon steel blade for strength and durability. Precision ground impulse hardened teeth provides optimum stroking action. Handle is ultrasonically welded to blade with a square/mitre feature that has 45 and 90 degree angles for marking work piece and a comfort grip. Full length protective sleeve.
SAW CARPENTER 9PT CRS CUT 15IN SAW HND TUF-E-NUF 22IN 8PT    SAW UNIV 15IN 16PT AGGRESSIVE
Easy start with 12pt. extra-fine front teeth, thick-body blade delivers rigidity and control and tapered pitch nose improves clearance and stability. M2 tooth technology, advanced tooth geometry and tri-ground teeth provide a fast, efficient cut. Deep gullets provide rapid removal of chips. TASK Toolbox Saw, General Purpose, 22 in Blade Length, 5 in Blade Width, 1 in Blade Thickness, 8, Hard Point Teeth, Rubber Handle Stanley Hand Saw, Universal, 15 in Blade Length, 12, Hard Point Teeth, Bi-Material Handle, For Heavy Duty and Fine Finish Applications
SAW HAND STANDARD CUT 8PT 20IN SAW UNIV 15IN UNIQUE HANDLE   SAW HAND 16IN 8PT SUPERCUT
Precision set teeth for smooth cuts. Hardened and tempered polished steel blade with resharpenable teeth for long life. IRWIN Hand Saw, Universal, 15 in Blade Length, 0.85 mm Blade Thickness, 11, Triple Ground Teeth, 22 in Overall Length, Comfort Grip, Ergonomic, Rubber/Wood Handle, Silver, For General Carpenter, Exterior Trim Carpenter, Remodeler, General Utility Cuts , Overhead Fascia And Gable Work, Removing Door Plates and Drywall Rough-In TASK Toolbox Saw, Series: SUPER-CUT, General Purpose, 16 in Blade Length, 6 in Blade Width, 1 in Blade Thickness, 8, Filed Hard Point Teeth, Steel Blade, Soft Touch Grip, Rubber Handle
SAW CARPENTER 9PT COARSE 15IN SAW CARPENTER 9PT CRS CUT 20IN SAW PNL 45/90DEG 15IN
Easy start with 12pt. extra-fine front teeth, thick-body blade delivers rigidity and control and tapered pitch nose improves clearance and stability. M2 tooth technology, advanced tooth geometry and tri-ground teeth provide a fast, efficient cut. Deep gullets provide rapid removal of chips. Easy start with 12pt. extra-fine front teeth, thick-body blade delivers rigidity and control and tapered pitch nose improves clearance and stability. M2 tooth technology, advanced tooth geometry and tri-ground teeth provide a fast, efficient cut. Deep gullets provide rapid removal of chips. Blade is 15 percent thicker; uses three cutting surfaces to cut; induction hardened teeth; back of saw can be used to mark 45 and 90 degree angles; thick, ergonomically designed grip resists slipping and adds comfort.
SAW HAND STANDARD CUT 8PT 24IN SAW HAND STANDRD CUT 12PT 24IN SAW HAND 22IN 8PT SUPERCUT
Precision set teeth for smooth cuts. Hardened and tempered polished steel blade with resharpenable teeth for long life. Precision set teeth for smooth cuts. Hardened and tempered polished steel blade with resharpenable teeth for long life. TASK Toolbox Saw, Series: SUPER-CUT, General Purpose, 22 in Blade Length, 6 in Blade Width, 1 in Blade Thickness, 8, Filed Hard Point Teeth, Steel Blade, Soft Touch Grip, Rubber Handle
SAW HAND 22IN 10PT SUPERCUT   BOX TOOL HANDSAW 9 PT 15 INCH SAW HAND PANEL 15IN
TASK Toolbox Saw, Series: SUPER-CUT, General Purpose, 22 in Blade Length, 6 in Blade Width, 1 in Blade Thickness, 10, Filed Hard Point Teeth, Steel Blade, Soft Touch Grip, Rubber Handle Saw has an aggressive three sided tooth design; back of saw can be used to mark 45 and 90 degree angles and teeth can be re-sharpened; select hardwood handle provides comfort and control. Unique tooth geometry which features a 3 sided edge design. The teeth are induction hardened, so they will hold their edge longer and resist damage that could occur when contacting nails and staples embedded in wood; also has a low friction ToughCoat blade coating that keeps the saw cutting smoothly through the material with less binding and the rigid aluminum handle helps you stay on your line.
SAW HND 16IN SFT GRIP HNDL    SAW TRIPLE GRD TH 15IN 11PT 4X CARP SAW 20IN COARSE 9PT
TASK Toolbox Saw, Series: BARRACUDA, General Purpose, 16 in Blade Length, 5 in Blade Width, 1 in Blade Thickness, 8, Filed Hard Point Teeth, Steel Blade, Soft Touch Grip, Rubber Handle Composite coating protects the blade with 2x more rust protection, 6x more abrasion protection, and 50 percent less friction. Blade is 15 percent thicker,uses three cutting surfaces to cut 50 percent faster and the induction hardened teeth stay sharp up to five times longer. The back of saw can be used to mark 45 degree and 90 degree angles; thick, ergonomically designed grip resists slipping and adds comfort. Easy start with 12pt. extra-fine front teeth, thick-body blade delivers rigidity and control and tapered pitch nose improves clearance and stability. M2 tooth technology, advanced tooth geometry and tri-ground teeth provide a fast, efficient cut. Deep gullets provide rapid removal of chips.
BOX TOOL HANDSAW 9 PT 20 INCH SAW HAND 12PT SHARP TOOTH 15IN SAW UNIV 20IN UNIQUE HANDLE
Saw has an aggressive three sided tooth design; back of saw can be used to mark 45 and 90 degree angles and teeth can be re-sharpened; select hardwood handle provides comfort and control. Uses three cutting surfaces for cutting; induction hardened teeth; ergonomically designed handle for better grip and improved comfort; welded handle eliminates screws. IRWIN Pull Saw, Universal, 20 in Blade Length, 0.85 mm Blade Thickness, 11, Triple Ground Teeth, 27 in Overall Length, Comfort Grip, Ergonomic, Rubber/Wood Handle, Silver, For General Carpenter, Exterior Trim Carpenter, Remodeler, General Utility Cuts , Overhead Fascia And Gable Work, Removing Door Plates and Drywall Rough-In
SAW HND 22IN SFT GRIP HNDL    SAW HAND SHORTCUT 8PT 20IN    SAW HAND PANEL 20IN
TASK Toolbox Saw, Series: BARRACUDA, General Purpose, 22 in Blade Length, 5 in Blade Width, 1 in Blade Thickness, 8, Filed Hard Point Teeth, Steel Blade, Soft Touch Grip, Rubber Handle Aggressive multi-purpose saw with induction hardened teeth that uses three cutting surfaces for cutting; back of saw can be used to mark 45 degree and 90 degree angles. Unique tooth geometry which features a 3 sided edge design. The teeth are induction hardened, so they will hold their edge longer and resist damage that could occur when contacting nails and staples embedded in wood; also has a low friction ToughCoat blade coating that keeps the saw cutting smoothly through the material with less binding and the rigid aluminum handle helps you stay on your line.
SAW HAND 12PT SHARP TOOTH 20IN
Uses three cutting surfaces for cutting; induction hardened teeth; ergonomically designed handle for better grip and improved comfort; welded handle eliminates screws.
   
 
1