Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > WELDING SUPPLIES > WELDING ELECTRODES
We found 33 results matching your criteria.
Sort By:
1 2
RD WLDG 1/8IN GRY 1LB         ELECTROD WLDG MILD STL RED LBL RD WLDG 3/32IN MILD STL 1LB
E6013 mild steel rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Wt .5 lb. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
RD WLDG 5/32IN MILD STL 1LB   ELECTRODE WELDING MILD STL 1LB RD WLDG 1/8IN MILD STL 1LB
"High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140. A mild steel, general purpose, all position electrode with stable arc characteristics and deep penetration. Use on AC or DC reverse polarity welding current. Fast freezing or rapid solidification of weld metal facilitates welding in vertical or overhead positions. High penetrating, all purpose electrode. Fence or post fabrication/repairs. Welding through medium amounts of paint, rust, dirt. "High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140.
ELECTRODE WLDG HI-STRENGTH 1LB RD WLDG 3/32IN MILD STL 1LB   RD WLDG 3/32IN FORNEY 1LB
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
RD WLDG 5/32IN FORNEY 1LB     ELECTROD WLDG MILD STL RED LBL RD WLDG 1/8IN FORNEY 1LB
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
RD WLDG 3/32IN MILD STL 1LB   ELECTRODE WLDG HI-STRENGTH 1LB ROD WELD GEN PURP 1LB 5/64IN
"High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ROD WELDING IRON 1/8INCH 1/2LB 44559 SS 1/8-1/2 LB BX ROD WEL RD WLDG 3/32IN MILD STL
"Nomacast" non-machinable cast iron specialty welding electrodes feature a non-conductive coating that is specially developed for welding dirty, heat-affected and oxidized cast iron. Ideally suited to cladding contaminated casting prior to joining with high nickel alloys. Non-machinable. Typical applications include machine bases, pedestals, frames and housings where heat and machinability are not an important factor. Hardness: RC 39. Recommended Polarity: DC Reverse, Straight or AC. Weight Lbs. (Kg): .5 (.22). Tensile Strength (PSI): 62,000. Amperage: 70-125. 312-16 stainless alloy "easy all steel" specialty welding electrodes are the ultimate rods for most grades of steel using any stick electrode power source. Can be used by anyone, regardless of prior welding experience. Features a superior combination of tensile strength and elongation. The arc is so ionized that you can not short it out. Typical applications include joining abrasions and heat and corrosion resistant steels. Best suited to horizontal fillet welds. Recommended Polarity: DC Reverse or AC. Weight Lbs. (Kg): .5 (.22). Tensile Strength: (PSI): 128,000. Amperage: 60-110. "High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140.
ROD/ELECTRD WELDING 5LB 3/32IN ROD WELDING MILDSTL 5LB 3/32IN ELCTRD F/AC WLDR 5LB
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
ELCTRODE 3/32IN 5LB F/SM WLDRS ROD WELDING DC ALUM 1/8IN .5LB RD WLDG 1/8IN MILD STL 10LB
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E4043 DC aluminum "AluminArc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum. Excellent for cast, wrought and extruded aluminum in all positions. Can also be used as a torch brazing alloy. Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plate, irrigation piping, engine blocks, transmission housings and railroad frogs. Recommended Polarity: DC Reverse. Weight Lbs. (Kg): .5 (.22). Amperage: 70-120. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
ROD WELDING STEEL 1/8INCH 10LB WELDING ROD 1/8IN 7014 10LB   ROD WELDING MILDSTL 10LB 1/8IN
E6010 an all-purpose electrode used in all positions; a deep penetrating rod for carbon and galvanized steel; E6010 is for use with a DC welder and runs on DCEP; ideal for welding through light to medium amounts of dirt, rust or paint. Recommended Polarity: DCEP (Reverse Polarity). Tensile Strength (PSI): 80,000. Amperage: 35-125. "High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ELCTRODE F/SM WLDRS 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB   RD WLDG 1/8IN AL 1LB
RD WLDG 1/8IN AL 1LB
Our Price: $44.99
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). Universal electrode for welding all cast, wrought and extruded aluminum and all aluminum alloys in all positions. Typical applications: truck beds, bodies and frames. Loading ramps and docks. Pipe, railing, banisters, stairs and diamond plate. Door & window frames & supports. Irrigation piping, transmission housings & gear boxes. Engine and motor blocks. Machine bases & supports. Bus bars, electrical switch boxes & mounts.
   
 
1 2