Skip to content
POWER TOOLS & ACC
PAINT & SUNDRIES
HEATING & COOLING
LAWN & GARDEN
PET & WILD BIRD
FARM & RANCH
OUTDOOR LIVING & PATIO
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
POWER TOOLS & ACC
BENCH & STATIONARY
We found 10 results matching your criteria.
Find by Pricing
Below 499 (2)
499 to 548.99 (1)
549 to 748.99 (3)
749 and Above (4)
Find by Brand
BOSCH POWER TOOLS (1)
CHERVON CANADA INC (1)
KING CANADA TOOLS (2)
Price: Low to High
Price: High to Low
30 per page
60 per page
120 per page
180 per page
300 per page
King Canada KC-5005R Heavy Duty Table Saw, 1 Phase, 110 VAC, 60 Hz, 15 A, 10 in Dia Blade, 4800 rpm, 5/8 in Arbor
King Canada KC-5100C Heavy Duty Jobsite Saw, 1 Phase, 110 VAC, 60 Hz, 15 A, 10 in Dia Blade, 4400 rpm, 5/8 in Arbor
SAW TABLE 10IN WORM DRIVE
Powerful 15 amp. 4.800 RPM ball bearing motor. Heavy-duty steel stand. Blade tilts 0 degrees to 45 degrees for versatile angle cutting. Single lever cam-locking handle on self -aligning rip fence locks front and rear for accurate ripping. Side mounted meter gauge and rip fence storage. 19" x 26" heavy-duty cast aluminium table. Meter gauge comes with adjustable facing for extra workpiece support. See-through blade guard. Riving knife and anti-kickback fingers. Comes with 10" x 40" tooth carbide ripping blade, rip fence, mitre gauge, push stick and wrenches.
Powerful 15 amp heavy-duty motor with reset. Large 21 x 30" cast aluminum table with extendable rails and table allowing up to 25" rip capacity to the right of the blade. Folding stand with large 8" wheels for portability. All in one height/bevel adjusting handwheel with blade height lock and micro bevel angle adjustment. On-board storage secures rip fence
Dewalt DWE7480 Table Saw, 120 V, 15 A, 2 hp, 10 in Blade, 4800 rpm
DeWalt DCS7485B Cordless Table Saw, 1-3/4 in at 45 deg and 2-1/2 in at 90 deg, Li-Ion Battery, 5800 rpm
Rockwell Portable Table Saw Trolley Stand, 120 VAC, 15 A, 10 in Blade, 4800 rpm
Compact 10" job site table say with Site-Pro modular guarding system. Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. 24" of rip capacity, easily cuts a variety of larger shelving and trim materials. Site-Pro modular guarding system allows for tool free adjustments of the guarding components appropriate for each application. 15 amp 4800 rpm motor quickly rips through hardwoods with ease. On board storage provides easy access to the Site-Pro guarding components and push stick when not in use. Metal roll cage base offers greater durability than plastic bases. Blade can be adjusted 0-45 degrees for bevel applications. Weighing only 48 lbs., the table saw can easily be moved on and off the job. Rear feet adjust to level the saw on uneven work surfaces. Dust port allows for 2-1/2" vacuum hook up and minimizes clean up. 24T carbide blade enhances cut quality and prolongs blade life. Table coating reduces friction for smoother cutting. Includes: Miter gauge, push stick, 10" carbide blade and blade guard. (DW7450 Stand sold separately Orgill sku 573.9974)
Maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all common materials. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. The rack and pinion fence allows for fast, easy adjustments. Power-loss reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position. Site-Pro Modular Guarding system allows for tool free adjustments of the guarding. Metal roll cage base offers greater durability than plastic bases. Table coating reduces friction for smoother cutting. Table coating reduces friction for smoother cutting. 5/8" arbor size. 1-3/4" depth of cut at 45 degrees. Weighs 45 lbs. Includes table saw, carbide blade, non-thru cut riving knife, push stick, miter gauge, blade guard, rip fence and (2) blade wrenches.
Laser indicator for consistent accuracy. Cuts 4x4 in one pass. Base of the saw incorporates a sturdy fold-down trolley stand with wheels, onboard accessory storage and can be rolled from one jobsite to another by using the outstretched leg as a pull handle. The stand also features an adjustable leg extension for set-up on uneven surfaces. Specs: no-load speed of 5000 rpm, overall table dimensions are 28-1/2"x19" with a 30" rip capacity to the right and 11" on the left, depth of cut is 3-9/16" at 90 degrees and 2-9/16" at 45 degrees, dado width is 1/2" and weighs 74 lbs. Includes: a rip fence, miter gauge, push stick, riving knife and sawdust collection bag.
Flexvolt SAW TABLE 60V W/BATT/CHARGER
Dewalt DWE7490X Table Saw, 120 V, 15 A, 2 hp, 10 in Blade, 4800 rpm
Bosch Table Saw Stand, 120 VAC, 15 A, 4 hp, 10 in Blade, 3650 rpm
This table saw is maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all materials. Rack and pinion telescoping fence rails make fence adjustments smooth and accurate and provides the capacity to rip 4 x 8 sheet goods. Runs off of 20V/60V Flexvolt battery system for maximum portability. Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position. On board storage for guard, fence, wrenches and miter gauge. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. Site-Pro modular guarding system allows for tool free adjustment of the guarding. Metal roll cage base offer greater durability than plastic bases. Table coating reduces friction for smoother cutting. Depth of cut at 45 degrees 1-3/4". Max width to left of blade 12". Tool weight 48 lbs. Includes: (1) 60 volt Max Table Saw, (1) Non-Thru Cut Riving Knife, (1) 20 volt/60 volt Max Flexvolt battery, (1) push stick, (1) Fast charger, (1) blade guard, (2) blade wrenches, (1) rip fence and (1) miter gauge.
Rack and pinion telescoping fence rail make fence adjustments fast, smooth and accurate. Material support can be sued for narrow rip cuts. 28-1/2" of rip capacity easily cuts a variety of larger shelving and trim material. On board storage provides easy access to the blade guard assembly, fence, riving knife, push stick, miter gage, wrenches and cord wrap when not in use. Compact folding stand. Blade guard assembly allows for tool free adjustments of the guard for different applications. Flip over fence, allows for narrow rip cuts. Telescoping fence rails retract to create a small portable package. Features a 15.0 amp high torque motor with the power to cut pressure-treated lumber and hardwoods. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides ideal material support. Includes: 10" 24-tooth carbide blade, folding table saw stand, miter gauge, push stick, folding stand, rip fence, 2x blade wrenches and blade guard assembly.
The Smart Guard System is the first ever quick and easy-to-use modular blade guard, anti-kickback pawls and riving knife system; provides superior control over the material and maximum visibility while cutting. Engineered for maximum trueness, the 'Squarelock' Rip Fence glides along the rail at a finger's touch or locks into place for solid and consistent cutting performance. Easy set up and take down of your table saw; heavy-duty construction and 8" pneumatic wheels allow the Gravity-Rise stand to handle the toughest jobsites. Integrated Sub-base increases tool life by handling jobsite abuse, while protecting the table saw's base. Built-in sub-base and tabletop carry handles add to the saw's portability from jobsite to jobsite. On tool storage for all saw attachments and tools. Soft Start and 'Constant Response' Circuitry for quiet and smoother start-up, reduced start-up torque and maintaining speed under load. Exclusive Arbor Lock for single wrench blade changes. INCLUDES: 10" Worksite Table Saw; 10" 40-Tooth Carbide Tip Saw Blade; Blade Wrench; Hex Key; Sliding Miter Gauge; 'Gravity-Rise'Table Saw Stand with Pneumatic Wheels; Smart Guard System.
DeWalt DWE7491RS Corded Table Saw With Rolling Stand, 2-1/4 in, 3-1/8 in, 45, 90 deg, 15 A, 120 VAC, 5/8 in Arbor
The 10" Jobsite table saw and rolling stand has a 15 amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool free guarding component adjustments and fast, accurate fence adjustments. Rolling stand designed for easy set-up and breakdown with ideal stability. Flip over ripping fence allows for narrow rip cuts. Onboard storage system provides easy access to the Blade Guard Assembly, fence, riving knife, miter gauge, wrenches, push stick and cord wrap when not in use. 15 amp motor quickly rips through hardwoods with ease. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 degrees and 2-1/4" at 45 degrees. The table provides superior material support: 21-7/8" x 26-3/8". Specifications: 5/8" arbor size; 10" blade diameter. Includes: 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge and rip fence.
All transactions are in Canadian dollars.