Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > SAW BLADES & ACCESSORIES > SAW BLADES- CARBIDE FINISH CUT > 10 INCH BLADES
We found 23 results matching your criteria.
Sort By:
1
BLD SAW CIR 10IN CARB 60TPI   BLD SAW CIR 10IN CARB         BLADE CIRC SAW 10IN 60T
Tuf-E-Nuf Circular Saw Blade, General Purpose, 10 in Dia, 5/8 in Arbor, Alternate Top Bevel (ATB) Teeth, 60 Teeth, 18 deg Tooth Angle, 6000 rpm Maximum, 0.102 in Kerf, C2 Carbide Cutting Edge, Steel Blade, Applicable Materials: Wood, Plywood and Particle Board, Usage: Fine Finishing TASK Circular Saw Blade, Series: Super Cut, 10 in Dia, 5/8 in Arbor, Alternate Top Bevel (ATB) Teeth, 60 Teeth, 18 deg Tooth Angle, 6000 rpm Maximum, 0.11 in Kerf, C2 Tungsten Carbide Cutting Edge, Usage: Fine Finishing Thin kerf, .045", design cuts more efficiently. Carbide tipped saw blades cut faster and last longer than conventional carbide blades. Heat treated for longer life. Alternative tooth bevel, .071" plate, +15 degree hook angle.
BLADE CIRC SAW CD 10IN 60T    BLADE CIRC SAW CARB 10IN 60T  BLD SAW CIR 10IN ATB 60TPI
Thin kerf saw blade for circular saws. Alternate top bevel, .2.7mm kerf, 13 degree hook angle. Thin kerf, .095", saw blades are for use with miter saws and table saws. Computer balanced plate reduces vibration for improved accuracy and better finish. Exclusive wedge shoulder for increased durability and accuracy. Used for fine crosscuts in natural wood, plywood and wood composites. Alternate top bevel, +5 degree hook angle, .069" plate. TASK Circular Saw Blade, Series: Hard Body, 10 in Dia, 5/8 in Arbor, Alternate Top Bevel (ATB) Teeth, 60 Teeth, 6000 rpm Maximum, 0.11 in Kerf, C3 Tungsten Carbide Cutting Edge, Hardened Steel Blade, Usage: Cross Cutting and Finishing
BLD SAW CIR 10IN TCG 80TPI    BLD SAW CIR 10IN ATB 80TPI    BLADE CIRC SAW CD 10IN 60T
TASK Circular Saw Blade, Resharpenable, Series: Hard Body, 10 in Dia, 5/8 in Arbor, Triple Chip Grind (TCG) Teeth, 80 Teeth, 6000 rpm Maximum, 0.118 in Kerf, Micrograin C4 Tungsten Carbide Cutting Edge, Hardened Steel Blade, Applicable Materials: Plastic, For Use With: Table, Mitre and Radial Arm Saws TASK Circular Saw Blade, Series: Hard Body, 10 in Dia, 5/8 in Arbor, Alternate Top Bevel (ATB) Teeth, 80 Teeth, 6000 rpm Maximum, 0.11 in Kerf, C3 Tungsten Carbide Cutting Edge, Hardened Steel Blade, Usage: Extra Fine Finishing Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6mm plate, .0.095" kerf.
BLD SAW CIR 10IN TCG 80TPI    BLADE CIR SAW FINISH 10IN 60T BLADE CIR SAW FINISH 10IN 60T
TASK Circular Saw Blade, Series: Hard Body, 10 in Dia, 5/8 in Arbor, Triple Chip Grind (TCG) Teeth, 80 Teeth, 6000 rpm Maximum, 0.11 in Kerf, C3 Tungsten Carbide Cutting Edge, Hardened Steel Blade, Applicable Materials: Non-Ferrous Metal, Usage: Professional Carpenter Thin kerf saw blade for miter saws and table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle. For slide miter saws and radial arm saws. Used for crosscutting oak, pine, melamine, plywood and moulding. Alternate top bevel, 071" plate, .087" thin kerf, 7-degree hook angle and 7,000 max rpm.
MARPLES CSB 10IN 60T ATB      BLD SAW CIR 10IN TC 60TPI     BLADE CIRC SAW CD 10IN 80T
For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Designed to do both cross-cutting and ripping. Teeth are arranged in a three or five tooth pattern and incorporate a flat raking tooth after each sequence of ATB teeth. 15-degree alternate top bevel plus raker, 10-degree positive hook angle, .098" thin kerf, 7,000 rpm. TASK Circular Saw Blade, Resharpenable, Series: Signature, 10 in Dia, 5/8 in Arbor, Triple Chip Grind (TCG) Teeth, 60 Teeth, 8600 rpm Maximum, 0.126 in Kerf, Micrograin C4 Tungsten Carbide Cutting Edge, Steel Blade, For Use With: Table, Mitre and Radial Arm Saws Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6mm plate, .0.095" kerf.
BLADE ULTRA FINE FINISH 10X90T BLADE CIR SAW ULTRA 10X80T    BLADE CIRC SAW PRCN 60TPI 10IN
Thin kerf saw blade for miter and table saws. Used for crosscutting oak, pine melamine, veneer, plywood and delicate molding. Laser cut stabilizer vents for reduced vibration and precise cuts. Thin kerf, .098", saw blade for use with miter and table saws. Premium Micro-Grain carbide produces ultra-sharp cutting edges. Dampening Slots reduce vibration. Tough Coat finish reduces heat, friction, and gum. Used for very smooth crosscuts. Alternate top bevel, 6,000 maximum RPM, .071" plate, kerf, 10 degree hook angle.
CIRC SAW BLADE 10IN 80T       BLD SAW CIR 10IN TC 80TPI     BLADE CIR SAW FINISH 10IN 80T
Thin kerf, .098, saw blade for use with miter and table saws. Premium Micro-Grain carbide produces ultra-sharp cutting edges. Dampening Slots reduce vibration. Tough Coat finish reduces heat, friction, and gum. Used for ripping, general purpose, and fine crosscutting. Alternate top bevel, 6,000 maximum rpm, .071" plate, 10 degree hook angle. TASK Circular Saw Blade, Resharpenable, Series: Signature, 10 in Dia, 5/8 in Arbor, Alternate Top Bevel (ATB)/Triple Chip Grind (TCG) Teeth, 80 Teeth, 8600 rpm Maximum, 0.118 in Kerf, Micrograin C4 Tungsten Carbide Cutting Edge, Steel Blade, For Use With: Table, Mitre and Radial Arm Saws, Includes: (4) ATB Blades and (1) TCG Blade For use on miter/slide miter and table saws. For on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, and plastics. Triple chip grind tooth design. Anti-vibration design and precision-tensioned steel plate provide critical protection against vibration, allowing these blades to cut smoother and quieter. .094", negative 5-degree hook angle and 7,000 max rpm.
MARPLES WW CSB 10IN 80T HI-ATB BLADE 10IN 60T 12DEG ATB CROSS
For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Used for extra-fine cross-cutting. High bevel angle increases the knife-like action at the edge of the blade. 30-degree high alternate top bevel, 10-degree positive hook angle, .098" thin kerf, 7,000 rpm.
   
 
1